270 vs 360 Degree LED Bollards: Which Fits Your Site
270 or 360 degree LED bollards: choose by boundary, junction and open area, then confirm height and spacing from the landscape drawing.
Choose a 270° LED bollard light when the fixture sits near a wall, planting border or path edge and the light should favour the usable area. Consider 360° distribution for open gardens, plazas and path junctions that need light in several directions. For contractors and buyers, this is only the starting point: the final choice should be checked against the site layout, mounting height and model-specific light information.
Where Does 270° Distribution Make Sense?
A partially shielded distribution is useful when one side of the fitting faces a boundary. It can direct more useful light toward the path instead of treating every direction equally.
What Are the Typical Applications?
- Walkways beside walls or planting beds
- Property edges and narrow landscape strips
- Locations where the rear side does not need illumination
For a relevant product reference, view the DB-CPDA113 LED garden bollard light, which is listed with 270° distribution. Confirm the required height and project details before specification.
When Is 360° Distribution More Suitable?
Full-around distribution is a practical starting point for open spaces where people approach from different directions. It may suit garden intersections, open courtyards and freestanding positions away from walls.
The DB-CPDA088 LED bollard light is one model listed with 360° distribution and several height options. Its suitability still depends on the layout and required visual effect.
What Should Buyers Compare Before Ordering?
| Project question | Starting point | What to verify |
|---|---|---|
| Is the fixture beside a boundary? | Consider 270° | Orientation and useful path coverage |
| Is the fixture in an open area? | Consider 360° | Light around the complete position |
| Are several heights available? | Compare samples or project data | Scale, spacing and visual comfort |
| Is the path edge or planting lit? | Compare 270° and 360° on site | Dark side facing away from the public route |
| Is glare visible from seating? | Consider louvre or shielded optics | Source visibility at eye height |
Do not approve a bulk order from the distribution label alone. Ask for the model drawing and available light data, and review a sample when the appearance of the light pattern is important.
What Should Be Included in the Enquiry?
Send the walkway width, fixture positions, preferred height, quantity and a marked layout. Browse our LED garden and bollard light range, then contact Daybreak Lighting to request suitable model options, drawings or a sample quotation.
What height and spacing should bollards use?
Distribution decides direction; height and spacing decide whether the path reads as continuous or as a series of isolated pools.
| Height | Typical use | Spacing to start from |
|---|---|---|
| 200–400 mm | Step edges, ground-level accents, low planting borders | 2–3.5 m |
| 400–600 mm | Path guidance, hotel walkways, villa gardens | 3–5 m |
| 600–800 mm | Seating areas, taller planting, plaza edges | 4–6 m |
| 800 mm+ | Feature positions, wide plazas | 6 m+ |
Wider spacing creates pools of light with dark gaps. That can suit feature planting, but it is poor for safe circulation after dark. Confirm spacing against the landscape drawing and the actual optics, not only the wattage.
Which models suit each distribution?
Compare the full LED garden lights and bollards range before selecting. Frequently specified options:
- DB-CPDA088 — 7W IP65 round bollard, 400/600/800 mm, 360° distribution.
- DB-CPDA113 — minimalist garden bollard with 270° distribution for path edges.
- DB-CPDA087 — 15W IP65 bollard for taller markers and open areas.
The surrounding scheme may also use LED wall lights on adjacent buildings and LED step lights where the path changes level.
Frequently Asked Questions
Is a 360° LED Bollard Light Always Brighter?
No. Distribution describes where light is sent, not the complete lighting result. Output, optics, height, spacing and the surrounding surfaces also affect its appearance.
Can 270° Bollard Lights Be Used Along a Straight Path?
Yes, particularly when the fittings sit along one edge. Their orientation should be confirmed before foundations and wiring are completed.
Should Every Bollard Light in One Project Use the Same Distribution?
Not necessarily. A project may use different distributions at perimeter paths, junctions and open landscape areas, provided the design remains visually consistent.
What Should Importers Request Before Confirming a Sample?
Request the exact model specification, dimensions, available heights, finish options and relevant light information. Then compare the sample with the intended installation position.
